AUTO WHEEL TRUING M/C
- Auto loading/unloading, auto wheel trueing by servo motor.
- Wheel driving and trueing by servomotor with accuracy ± 0.15m/m.
- Use sensor to find the spokes for trueing, which can prevent the defect of spokes surface with scar.
- Electric motor adjustment for different rim size, which is saving the size change time.
- Available to make for tension keeping with accuracy ±15kgf.
- Available to set for required trueing mode according to wheel's quality
- Trueing by single hand available when space between spokes is smaller, such as smaller size or more spokes of wheel
- With two out-going tracks: one for good wheels and the other for rejected ones
- Apply to 16"-28" wheels, included deep-V type
- With screens to display reasons for number of rejected wheels, average trueing time, indication for sensor with problem
|Machine Function||Suitable Working Range|| RIM SIZE 16"~28"
NIPPLE SIZE 12#~15#
HUB AXLE: ∮ 8 - ∮14.5MM
MAX. HUB LENGTH: 220 MM
MIN. HUB INNER WIDTH: 65 MM
WHEEL WIDTH: 14 – 45 MM
|Electricity consumption||1.3 KW|
|Air consumption||14 L/MIN|
|Electrical Control||Power source||220V/1P/50Hz or as request|
|Machine Outlook||Machine Color||Shuz Tung green color or as request|
|Air Pressure||5 ~ 7 kg/c㎡|
|Dimension (L×W×H)||1300 x 1250 x 1650 MM|
|Net Weight||750 KGS|
|Tooling Spec.||Nipple gear||Nipple size support|