Parts EN TestingHT-2332DB
Bicycle brakes / riding testing M/C
- This tester is suitable to test riding & brakes performance of a bicycle fully assembled. The tester equipped 2 adjustable rollers for adjusting interval between front and rear wheel upon different size of bicycle and corresponded with standard/legislation/practice of each country. Following spec as standard described to install jump plate and load of each part of bike such as seat post, pedals, handlebar, luggage carriers.
- Riding test: Adjusting roller according to bike's front & rear wheel actual interval then constant apply wheels running speed under 7~24km/hr during seting time, after test the bike should hold normal function and there should be no visible cracks or fractures in any part of bike. Brakes test: Set up roller's friction coefficient, wind speed, riding-way slope, water-spray times of loaded brake handlever base on standard druing testing time and determined bike's performance upon test result.
- We offer one set of PC hardware and operation software of this tester.
- This machine is designed according to standard EN 14764 / EN 14765 / EN 14766 / EN 14781, modular grip using depend on standard of each country.
|Adjustable Range||(mm)||Max.1200mm (Between front & rear wheels )|
|Counter Setting||Diameter (mm)||Ø760 (Ø560 is optional)|
|Jump block amount & combination phase||3 blocks x 120° phase (4 blocks x 90° phase- optional)|
|RPM (km/hr)||Max. 30, as per standard requirement|
|Power||Servo motor + reducer + clutch|
|Rotation Speed of Cranks||Km/hr||7 – 24 km / hr|
|Counter Weight||Seat post (kg)||36|
|Luggage carriers (kg)||10, 18 OR 25 according to luggage carriers, area 240X240 (assembly type)|
|Head tube (kg)||14|
|Force to Brake Grip||Continuity load & release (pat.)||DIN:Max. 180N (30N per stage )|
|Water Spray||ml/s||Max. 4 ml/s|
|Friction Coefficient||-||≧ 0.5 ≦1|
|Power||-||3 ø x 220V x 50Hz / 60 Hz (3 ø x 380V 選用)|
|Dimension (WxHxD)||Main body (cm)||260 x 240 x 80|
|Control Box (cm)||260 x 80 x 100|