EN Tester


Bicycle brakes / riding testing M/C


  • This tester is suitable to test riding & brakes performance of a bicycle fully assembled. The tester equipped 2 adjustable rollers for adjusting interval between front and rear wheel upon different size of bicycle and corresponded with standard/legislation/practice of each country. Following spec as standard described to install jump plate and load of each part of bike such as seat post, pedals, handlebar, luggage carriers.
  • Riding test: Adjusting roller according to bike's front & rear wheel actual interval then constant apply wheels running speed under 7~24km/hr during seting time, after test the bike should hold normal function and there should be no visible cracks or fractures in any part of bike. Brakes test: Set up roller's friction coefficient, wind speed, riding-way slope, water-spray times of loaded brake handlever base on standard druing testing time and determined bike's performance upon test result.
  • We offer one set of PC hardware and operation software of this tester.
  • This machine is designed according to standard EN 14764 / EN 14765 / EN 14766 / EN 14781, modular grip using depend on standard of each country.

Adjustable Range(mm)Max.1200mm (Between front & rear wheels )
Counter SettingDiameter (mm)Ø760 (Ø560 is optional)
Jump block amount & combination phase3 blocks x 120° phase (4 blocks x 90° phase- optional)
RPM (km/hr)Max. 30, as per standard requirement
PowerServo motor + reducer + clutch
Rotation Speed of CranksKm/hr7 – 24 km / hr
Counter WeightSeat post (kg)36
Pedals (kg)18
Handlebar (kg)6.75
Luggage carriers (kg)10, 18 OR 25 according to luggage carriers, area 240X240 (assembly type)
Head tube (kg)14
Force to Brake GripContinuity load & release (pat.)DIN:Max. 180N (30N per stage )
Water Sprayml/sMax. 4 ml/s
Friction Coefficient-≧ 0.5 ≦1
Power-3 ø x 220V x 50Hz / 60 Hz (3 ø x 380V 選用)
Dimension (WxHxD)Main body (cm)260 x 240 x 80
Control Box (cm)260 x 80 x 100